Chemical kit for your Spa or Swim Spa?
FREE DELIVERY TO YOUR HOME.
Do you need a large chemical kit that includes everything you need in one go. This Chemical Kit can last up to 8 months. If you buy these items individually it could cost over $495.
This Chemical Kit is now $445.00 and includes FREE Postage and Packing to your door.
Contents Of Chemical Kit
1 x Spa Bromine 1 kg
1 x Spa Alkanlinity 500g
1 x PH reducer 1 kg
2 x Spa Shock 1 KG x 2
1 x Filter Cleaner 500 ML
1 x Hardness Raiser 500g
1 x Spa floating dispenser to hold 20 tablets
1 x Pool Check Test strips
1 x Insturction sheet
SPAS DIRECT BROMINE TABLETS :
This is a sanitiser for your spa. Bromine levels should be maintained between 3 and 6ppm (parts per million). Use 1 x 20 gram tablet per 1000 litres of spa water. Place the tablet in the floating dispenser and secure the lid before placing the dispenser in the spa. Replace the tablet when it is dissolved. Do not put any other chemicals in this dispenser.
SPAS DIRECT ALKALINITY INCREASER :
Alkalinity should be maintained between 80-150ppm. To raise your alkalinity by 20ppm, add 35 grams per 1000 litres of spa water. Dissolve this a bucket of spa water before broadcasting over the water surface.
SPAS DIRECT pH REDUCER (#6):
pH should be maintained between 7.4 and 7.6. Use your test strips to measure this regularly. To reduce pH, add no more than 30 grams per 1000 litres of spa water. Dissolve this in a bucket of spa water before adding the deepest part of the spa. Take care to avoid any metal fittings.
SPAS DIRECT SPA SHOCK (#8):
Add this to the spa water in the morning or evening when the spa in not in use by bathers. For the initial dose, add 30 grams per 1000 litres of spa water and then 15 grams per 1000 litres of spa water on a weekly basis. Also add 15 grams per 1000 litres of spa water 15 minutes before and after a heavy bather load. Ensure your pH, alkalinity and hardness levels are in the range stated on the label.
SPAS DIRECT FILTER CLEANER & DEGREASER (#9):
Remove your spa filter element. Add 500ml of product to 20 litres of fresh water. Soak the element for 24 hours then hose off thoroughly before replacing in the spa filtration unit.
SPAS DIRECT HARDENSS RAISER (#11):
Hardness should be maintained between 150-300ppm. To raise water hardness level by 100ppm, add 150 grams of product per 1000 litres of spa water. Dissolve this in a bucket of spa water before broadcasting over the water surface. To reduce hardness levels, drain some water, refill then re-test.